Technology of the cleaning
the cleaning process is divided into several phases; the concrete cleaning method depends on the product that is being cleaned:
- Steaming
Medium pressure steam (pressure 0.8–1.2 MPa, temperature 190–230C) is fed inside the container. - Rinsing with warm (hot) water:
Rinsing is conducted using water with temperature of 60–90C and pressure of 1-1.5 MPa. The hot water is sprayed inside the container using a rotating nozzle. - Rinsing with cold water
Rinsing with cold water with pressure of 0.45 MPa and 1.6 MPa is conducted for the purpose of cleaning some products or cooling down the container after hot cleaning. If needed, solvents can be used and manual cleaning or final manual treatment conducted.
If needed, solvents can be used and manual cleaning or final manual treatment conducted.
Used cleaning substances
Crude oil, petroleum, recycled cleaners of the kerosene type, butyl acetate, white spirit, depolymer forte, etc.
Cleaned products
List of the cleaned dangerous goods pursuant to ADR – classes: 3, 4.1, 5.1, 8 and 9, polyester resin.
Unacceptable products
Substance of the following classes: 4.2 (self-igniting substances), 4.3 (substances that create flammable gases when in contact with water), 5.2 (organic peroxides), 6.1(toxic substances), 6.2 (infectious substances) pursuant to ADR.
Cleaning tanks from asphalt or resin is not a part of our common offer.
Substance of the following classes: 4.2 (self-igniting substances), 4.3 (substances that create flammable gases when in contact with water), 5.2 (organic peroxides), 6.1(toxic substances), 6.2 (infectious substances) pursuant to ADR.
Cleaning tanks from asphalt or resin is not a part of our common offer.
Price
Price of the cleaning is governed by the valid price list and it depends on the cleaning time and number of cleaned chambers. We issue a European Cleaning Document (ECD) after each cleaning.
Capacity
The steam station has two newly reconstructed stands for cleaning tanks of road tank vehicles.
Cleaning time
The cleaning time depends on the number of cleaned chambers, transported substances and customer requirements. The average sufficient cleaning time is approximately 30minutes.
